|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
How to install a Cado Motus brake. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Below are the parts that come with a Cado Motus brake.
(article continued below) |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Below you can see I have pulled the back two axles out of the frame. |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
Below you can see the difference between a normal axle and the replacement axle that will go in. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Below you can see the 2 replacment axles have been put in. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
Below you can see what the opposite side looks like if I flip the frame over. |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
Now slide the 2 plastic spacers over the protruding axle. |
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Now put your brake on and screw the 2 screws in.
(Attn: The two screws shown below have now changed. The front two screw heads use a different wrench size then the back two screw heads. This means you will need 2 different wrench sizes to take out the 4 brake screws. I had no say in this, it's how Cado Motus is now making the new brake mechanism.) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
Flip the frame over and screw the 2 screws in the other side and your done. |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Below is the fully assembled brake. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
Below you can see the height off the ground the brake pad will be by putting this brake on an 80mm frame. I slid an 8mm axle under the pad so if you have and 84mm frame this distance will increase to 10mm a 90mm frame will increase the distance to 13mm and a 100mm frame it will increase the distance to 18mm. This brake will only work on the frames that use the larger diameter threading axles (270 thousandths) such as Cado Motus, Mogema, Boen, Maple, Bont, Tru-Rev, Viper but not the smaller threaded axle (235 thousandths) of Verducci, Canariam or Hyper. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If you have any questions please email us at: support@nettracing.com
Richard, The order arrived (Cado Motus brake). It fits my Luigino Pilot frame without any trouble. Just some information since Luigino was not listed on the webpage. Michael |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Before you buy from someone else give us a call or email us at PriceMatch@nettracing.com to see if we can meet or beat the price. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Toll-Free Order Line: 1-800-668-5280 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
©2000 Nett Racing, all rights reserved . |
|
|
|
|
|
|
|
|
|
|
|
|
|
|