Bones® REDS® are manufactured in China to our Bones Skate Rated™ specifications in a manufacturing facility dedicated to producing the highest quality skate bearings in China. They are inspected twice before being shipped to skaters and offer the greatest combination of performance, durability and low cost in the industry. Because they offer near Bones Swiss performance at a fraction of the cost, they have become the best selling bearings.
Luigino Bionic Ceramic Bearings 12 Pack - $74.95 16 Pack - $99.95 20 Pack - $124.95 Bionic Ceramic Bearings are made for skaters looking for "ELITE" level speed but at a recreational price! Designed to meet the harsh demands skaters require, the Bionic Ceramic bearings are sure to NOT DISAPPOINT! Bionic CERAMIC Bearings, High grade black ceramic balls, Double honed inner and outer races, Nylon cage (retainer), Bionic light oil (included).
This unique design features six larger diameter balls instead of the seven balls used in most 608 bearings. The advantage of this design is higher speed, greater strength and durability. Made in Switzerland. Features: Single, non-contact, removable rubber shield allows for easy cleaning and less friction. High speed nylon ball retainer for greater strength and speed. Pre-lubricated with Speed Cream® racing lubricant Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.
Powerslide SWELL AQUAMARINE 100. Our classic silhouette enhanced with limitless performance. The Powerslide SWELL AQUAMARINE 100 is a revolutionary inline skate specially designed for intense fitness training. This skate features our anatomically shaped shell with flex cuts in the ankle area and RECALL fit with memory foam to provide superior comfort and maximum support. The new upper combines our stretchable and ventilated second-skin Powerknit upper with welded TPU reinforcements to increase responsiveness and stability. The highly abrasion resistant TPU material protects the toe and side panels against falls and wear and tear increasing the lifespan of the skates to endure even the most demanding trainings.
GO BIG in these Roller Derby Elite fitness and distance skates featuring USA-made 125mm 3-wheel setup. SKATE LONGER with quick-dry comfort liner, supportive shell, and micro-fit closure system. HIGH END FEATURES from speed skate tech and fitness performance give you the best skating experience. RACE READY.
Powerslide SWELL MULTICOLOR FLARE 100 Skate. Daring design, extraordinary performance. The Powerslide SWELL is a revolutionary inline skate specially designed for intense fitness training. The Powerslide Swell Multicolor Flair 100 features a reworked shell with flex cuts in the ankle area and RECALL fit with memory foam to provide superior comfort and maximum support. New power knit ventilated upper with a sleek fit that shapes around your foot seamlessly to fit like a glove. TRINITY mount with 3 fixation points will help you reach new levels of performance. This skate featues a light and strong POWERSLIDE Elite 9.1" - 231mm magnesium casted frame, Undercover by Matter 100mm/86A wheels and Wicked ABEC 9 bearings. A height adjustable brake system (HABS brake) is included inside the box.
The first thing you want to do is mount the frame on the boot and lightly tighten the bolts. Second is to center the frame with the back of the boot. Not like this (see below). And not like this. Here the frame is in the center in the back and toed in a bit in front. Here I'm putting a leather tab (tabs are 40 thousands of an inch or 1 mm thick) on the bottom of the boot next to where the frame meets the boot. These tabs are put on the outside of the boot and frame, not the inside. Tabs can be cut out of a leather work glove that can be found .........
Speed Skating & Double Push For Beginners Being someone who's been doing the double push for years and looking on the internet at the "how to do the double push" information, I was completely lost. Now if someone who can do the double push doesn't understand the "how to do the double push" information, how is someone that can't do the double push supposed to understand. In this article I made the steps very basic to get you on your way to doing the double push. First you have to learn your outside edges. If you take nothing away from this other than learning your outside edges you have taken a major step........
How to align your skate frames The first thing you want to do concerning proper frame alignment is center the frame to the heel of the boot (try to always keep the frame center to the heel of the boot). Below is a picture of the back of a boot with the frame in the center of the heel. Next is to center the frame to the front of the boots. Now that you have the frames centered to the front and the back of the boot you now want to go out and skate for 2 minutes to see if your pronating (ankles collapsing in) or supinating (ankles falling out). If your ankles are not collapsing to the inside your a supinater and you can leave the frames in a center front.........
