FR Skates SL Freeride V2 Carbon Inline Skates

FR Skates SL Freeride size chart: measured foot in centimeters with EU, US, UK and Mondo sizes

The FR Skates SL Freeride V2 is the second version of FR's carbon freeride skate. It has a full carbon fiber shell, an integrated Intuition liner and FR's 90/80/80/90 Freeride frame.

FR SL Freeride V2 features

Full carbon fiber shell: Direct power, precise control.
Integrated Intuition lining: A new, harder wearing lining. The foam molds to your foot, and it can be heat molded over the whole foot or one spot.
Stronger lacing: The top 3 eyelets sit on an outer reinforcement, for even lace tension, a locked heel and better side support.
FR Freeride frame: A 90/80/80/90 setup, 253mm long, flat and low, on a 165mm mount.
Manao Honu wheels: Made in Germany, medium hardness, for grip and a steady roll.
2 micrometric buckles, a toe strap and laces, TWINCAM MW9 bearings.

Made for: Freeride, city skating and fast technical skating.

Sizing

The FR SL Freeride V2 comes in sizes 7 to 12. Measure your foot and order the size for your foot length in FR's chart below. Foot length gives a more accurate size than your street shoe size. If you fall between two sizes, choose the larger size.

How to measure your foot

Put a sheet of paper on a hard floor against a wall. Stand with your heel against the wall and mark the tip of your longest toe. Measure from the wall to the mark in inches or centimeters. Measure both feet and use the longer one.

Foot (inches)	Foot (cm)	FR size (US)
10.0"	25.5 cm	7
10.2"	26 cm	7.5
10.4"	26.5 cm	8
10.6"	27 cm	9
10.8"	27.5 cm	10
11.2"	28.5 cm	10.5
11.4"	29 cm	11
11.6"	29.5 cm	12

In a good fit, the toes lie flat and can touch the front of the skate without pressing on it.

Questions

How does the FR SL Freeride V2 fit?

Measure your foot and order the size that matches your foot length in FR's chart. Between two sizes, choose the larger size.

Can the liner be heat molded?

Yes. The Intuition foam molds to your foot as you skate, and it can be heat molded over the whole foot or just one spot. FR says to try both skates on first with any insole you plan to use, and to mold only if they fit.

What comes with it?

A pair of ready to skate SL Freeride V2 skates with Freeride frames, Manao Honu wheels and MW9 bearings.

Specs

Shell	Carbon fiber
Liner	Integrated Intuition, self-molding, heat moldable
Insole	Premium
Closure	Laces, toe strap, 2 micrometric buckles
Frame	FR Freeride 90/80/80/90 setup, 253mm long, flat, 165mm mount
Wheels	Manao Honu, medium hardness
Bearings	TWINCAM MW9
Color	Black
Sizes	7, 7.5, 8, 9, 10, 10.5, 11, 12